A calibration system for superconducting gravimeters

A new method for the calibration of a superconducting gravity meter is described, in which a 273 Kg annular mass is placed around the meter and is moved up and down. The geometry of the apparatus is easy to model and the accuracy in the computation of the gravity variation induced by the mass, 6.7µgal, is limited only by the accuracy in the knowledge of value of the gravitational constant. Measurements done in 91 and 92 for the calibration of the instrument GWR-T015 are described. The calibration factor has been determined with a precision of about 0.3%.     

Deep structure of the northeastern margin of the Parnaiba Basin, Brazil, from magnetotelluric imaging

The magnetotelluric (MT) method has been applied to the determination of the deep resistivity structure of the northeastern margin of the Parnaiba Basin. Transient electromagnetic (TEM) and MT data were collected in early 1999 along a 95 km long N–S line, extending from the coast across the projected subcrop position of a discontinuous fault found to the west of the study area that is believed to be a possible basin‐bounding fault. The MT data were processed to yield the TE‐ and TM‐mode responses and then corrected for static shift using central‐loop and single‐loop TEM data, respectively. Regularized 2D MT inversion was subsequently undertaken using a structured initial model with the near‐surface constrained by TEM inversion results. As a consistency check, we performed another set of 2D inversions using different smooth initial models. The various optimal 2D inversion models show clearly the presence of a major basement trough, over 2 km deep, located about 70 km from the coast. We interpret it as possibly marking the main basin margin and suggest that it may have implications for groundwater resource development in the area.     

Variographic analysis of tropical forest cover from multi-scale remotely sensed imagery

Tropical forest mapping is one of the major environmental concerns at global and regional scales in which remote sensing techniques are firmly involved. This study examines the use of the variogram function to analyse forest cover fragmentation at different image scales. Two main aspects are considered here: (1) analysis of the spatial variability structure of the forest cover observed at three different scales using fine, medium and coarse spatial resolution images; and (2) the study of the relationship between rescaled images from the finest spatial resolution and those of the medium and coarse spatial resolutions. Both aspects are analysed using the variogram function as a basic tool to calculate and interpret the spatial variability of the forest cover. An example is presented for a Brazilian tropical forest zone using satellite images of different spatial resolutions acquired by Landsat TM (30 m), Resurs MSU (160 m) and ERS ATSR (1000 m). The results of this study contribute to establishing a suitable spatial resolution of remotely sensed data for tropical forest cover monitoring.     

U–Pb geochronology of the southern Brasília belt (SE-Brazil): sedimentary provenance, Neoproterozoic orogeny and assembly of West Gondwana

The Brasília belt borders the western margin of the São Francisco Craton and records the history of ocean opening and closing related to the formation of West Gondwana. This study reports new U–Pb data from the southern sector of the belt in order to provide temporal limits for the deposition and ages of provenance of sediments accumulated in passive margin successions around the south and southwestern margins of the São Francisco Craton, and date the orogenic events leading to the amalgamation of West Gondwana.Ages of detrital zircons (by ID–TIMS and LA-MC-ICPMS) were obtained from metasedimentary units of the passive margin of the São Francisco Craton from the main tectonic domains of the belt: the internal allochthons (Araxá Group in the Áraxá and Passos Nappes), the external allochthons (Canastra Group, Serra da Boa Esperança Metasedimentary Sequence and Andrelândia Group) and the autochthonous or Cratonic Domain (Andrelândia Group). The patterns of provenance ages for these units are uniform and are characterised as follows: Archean–Paleoproterozoic ages (3.4–3.3, 3.1–2.7, and 2.5–2.4 Ga); Paleoproterozoic ages attributed to the Transamazonian event (2.3–1.9 Ga, with a peak at ca. 2.15 Ga) and to the ca. 1.75 Ga Espinhaço rifting of the São Francisco Craton; ages between 1.6 and 1.2 Ga, with a peak at 1.3 Ga, revealing an unexpected variety of Mesoproterozoic sources, still undetected in the São Francisco Craton; and ages between 0.9 and 1.0 Ga related to the rifting event that led to the individualisation of the São Francisco paleo-continent and formation of its passive margins. An amphibolite intercalation in the Araxá Group yields a rutile age of ca. 0.9 Ga and documents the occurrence of mafic magmatism coeval with sedimentation in the marginal basin.Detrital zircons from the autochthonous and parautochthonous Andrelândia Group, deposited on the southern margin of the São Francisco Craton, yielded a provenance pattern similar to that of the allochthonous units. This result implies that 1.6–1.2 Ga source rocks must be present in the São Francisco Craton. They could be located either in the cratonic area, which is mostly covered by the Neoproterozoic epicontinental deposits of the Bambuí Group, or in the outer paleo-continental margin, buried under the allochthonous units of the Brasília belt.Crustal melting and generation of syntectonic crustal granites and migmatisation at ca. 630 Ma mark the orogenic event that started with westward subduction of the São Francisco plate and ended with continental collision against the Paraná block (and Goiás terrane). Continuing collision led to the exhumation and cooling of the Araxá and Passos metamorphic nappes, as indicated by monazite ages of ca. 605 Ma and mark the final stages of tectonometamorphic activity in the southern Brasília belt.Whilst continent–continent collision was proceeding on the western margin of the São Francisco Craton along the southern Brasília belt, eastward subduction in the East was generating the 634–599 Ma Rio Negro magmatic arc which collided with the eastern São Francisco margin at 595–560 Ma, much later than in the Brasília belt. Thus, the tectonic effects of the Ribeira belt reached the southernmost sector of the Brasília belt creating a zone of superposition. The thermal front of this event affected the proximal Andrelândia Group at ca. 588 Ma, as indicated by monazite age.The participation of the Amazonian craton in the assembly of western Gondwana occurred at 545–500 Ma in the Paraguay belt and ca. 500 Ma in the Araguaia belt. This, together with the results presented in this work lead to the conclusion that the collision between the Paraná block and Goiás terrane with the São Francisco Craton along the Brasília belt preceded the accretion of the Amazonian craton by 50–100 million years.     

Zero-offset P–S energy in horizontally layered media

The existence of non‐zero reflectivity for zero‐offset PS waves in horizontally layered media is discussed. Field measurements have suggested the occurrence of this phenomenon. We show that, in some cases, if anisotropy is considered in the problem, this reflectivity can be predicted. By using an approximated formulation to determine the coefficient of reflection in arbitrarily anisotropic media, it is clear that, for some elastic arrangements of the subsurface, reflected energy is associated with the converted wave resulting from normal P‐wave incidence.     

A Criterion for Brittle Failure of Rocks Using the Theory of Critical Distances

This paper presents a new analytical criterion for brittle failure of rocks and heavily over-consolidated soils. Griffith’s model of a randomly oriented defect under a biaxial stress state is used to keep the criterion simple. The Griffith’s criterion is improved because the maximum tensile strength is not evaluated at the boundary of the defect but at a certain distance from the boundary, known as half of the critical distance. This fracture criterion is known as the point method, and is part of the theory of critical distances, which is utilised in fracture mechanics. The proposed failure criterion has two parameters: the inherent tensile strength, σ ₀, and the ratio of the half-length of the initial crack/flaw to the critical distance, a/L. These parameters are difficult to measure but they may be correlated with the uniaxial compressive and tensile strengths, σ _c and σ _t. The proposed criterion is able to reproduce the common range of strength ratios for rocks and heavily overconsolidated soils (σ _c/σ _t = 3–50) and the influence of several microstructural rock properties, such as texture and porosity. Good agreement with laboratory tests reported in the literature is found for tensile and low-confining stresses.     

The influence of physical and biological processes on the ichthyoplankton communities in the Gulf of Sirte (Southern Mediterranean Sea)

This paper reports on the first study on the ichthyoplankton community structure in the Gulf of Sirte and its spatial distribution in relation to environmental conditions and zooplankton abundance. The results make an important contribution to the future management of fisheries in this unexplored, but much exploited, area. Biological samples were collected in July 2008 using a Bongo40 net. In total, 1914 larvae were found and 1652 of these were identified. In particular, bathypelagic taxa were the most abundant, followed by demersal, mesopelagic, pelagic and epipelagic taxa. The ichthyoplankton community had a patchwork distribution influenced by oligotrophic conditions, the bottom depth and oceanographical features. The results suggest that environmental forcings were able to transport the ichthyoplankton to productive areas. Indeed, maximum fish egg densities were found in coastal stations in correspondence with the Atlantic Tunisian Current inflow, whereas larvae were mainly concentrated in the east side of the Gulf, probably as a result of advection by the anticyclonic circulation. Additionally, the distribution patterns of the total larvae density and the different assemblages were well matched with the abundance of the zooplankton, probably determining final larval survival, growth and recruitment.